Begagnade fynd
Banger Deals!
Begagnade fynd
Banger Deals!
sE Electronics Gemini II

Klicka på bilden för fler bilder

No items found.

sE Electronics Gemini II

BEGAGNAD
VÅRT PRIS:
PRIS:
 14450,00 SEK
Rekommenderat Pris:

EAN/UPC:

1313002

Frågor om produkten?
Specifikationer

The sE Gemini II is the larger-than-life answer to your vocal tracking needs The Gemini II dual valve microphone is a no-holds-barred piece of microphone history. The dual valve design means pure valve warmth from the 12AX7 input valve, coupled with a 12AU7 valve on the output stage. The result is an incredibly large, detailed, and intimate sound – reminiscent of the classic valve microphones from decades ago, but with a thoroughly modern twist. DUAL-TUBE DESIGN Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high-frequency rolloff typically incurred with a transformer. This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic. Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani. The Gemini II comes packaged in a wooden presentation box next to its custom shockmount and robust power supply, all within a secure and solid flight case. Specifications Capsule Type: Hand-Crafted True Condenser Diaphragm: 35mm Gold/Mylar Directional Pattern: Cardioid Frequency range: 20 Hz - 20 kHz Impedance: 200 Ohms Sensitivity: 35.48 mV/Pa (-29 dB) Max SPL: 135/145 dB (0/-10 dB pad) (0.5% THD @ 1kHz) Signal to Noise Ratio: 75 dB Self Noise: 19 dB(A) Pass Filter Switch: 150 Hz Preattenuation Pad: -10 dB Power Requirement: Dedicated PSU (included) Weight (mic): 1224g Weight (PSU): 1691g Tube complement: 1x 12AX7/ECC83, 1x 12AU7/ECC82 Connector: XLR3F from PSU

The sE Gemini II is the larger-than-life answer to your vocal tracking needs

The Gemini II dual valve microphone is a no-holds-barred piece of microphone history. The dual valve design means pure valve warmth from the 12AX7 input valve, coupled with a 12AU7 valve on the output stage. The result is an incredibly large, detailed, and intimate sound – reminiscent of the classic valve microphones from decades ago, but with a thoroughly modern twist. DUAL-TUBE DESIGN

Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high-frequency rolloff typically incurred with a transformer. This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic. Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani. The Gemini II comes packaged in a wooden presentation box next to its custom shockmount and robust power supply, all within a secure and solid flight case. Specifications

Capsule Type: Hand-Crafted True Condenser

Diaphragm: 35mm Gold/Mylar

Directional Pattern: Cardioid

Frequency range: 20 Hz - 20 kHz

Impedance: 200 Ohms

Sensitivity: 35.48 mV/Pa (-29 dB)

Max SPL: 135/145 dB (0/-10 dB pad) (0.5% THD @ 1kHz)

Signal to Noise Ratio: 75 dB

Self Noise: 19 dB(A)

Pass Filter Switch: 150 Hz

Preattenuation Pad: -10 dB

Power Requirement: Dedicated PSU (included)

Weight (mic): 1224g

Weight (PSU): 1691g

Tube complement: 1x 12AX7/ECC83, 1x 12AU7/ECC82

Connector: XLR3F from PSU

Tycker du någon vara är för dyr eller har du sett den billigare hos en konkurrent? Kontakta oss så försöker vi matcha priset!

Copyright 2021  © Musikshopen AB